– Windows 10 Activators are here! Download for free!

Cisco Smart Licensing

Smart Licensing Client feature is a standardized licensing platform that simplifies the Cisco software experience and helps you to understand how Cisco software is used across your network. Smart Licensing is the next generation licensing platform for all Cisco software products.

For additional information on Cisco Smart Licensing, see Cisco Smart Licensing Client.

Cisco License Call Home

You can interact directly with the Cisco Product License Registration portal from your device by using the Cisco License Call Home interface. This interface is included with the A complete security tool Free Activators Software Activation feature and described in the Cisco Software Activation Conceptual Overview and the Configuring Cisco License Call Home chapters in Cisco IOS Software Activation Configuration Guide.

The License Call Home feature works as a client or server model, a complete security tool Free Activators. Each transaction requires a separate connection to the Cisco licensing infrastructure. The License Call Home feature displays prompts for obtaining required information, converting that information into a defined data structure, a complete security tool Free Activators, and then connecting to the Cisco licensing back-end to interact with the Cisco licensing infrastructure. A request is initiated by a License Call Home EXEC command, and the response is provided by the Cisco licensing infrastructure.

This section contains the following topics:

Before You Begin

Your router must have an Internet connection and use HTTPS to connect to the Cisco licensing infrastructure.

Installing a License Using License Call Home

Note Purchase the software feature or package you want to install. You receive a product activation key (PAK) with your purchase.

To install a license using the License Call Home feature, follow these steps:

Step 1 Use the show license call-home pak EXEC command to display the SKU list and features available for the PAK provided.

Step 2 Use the license call-home install pak command to install a license by using the Cisco License Call Home function.

a. Complete the license installation by entering yes when prompted to install the license and then entering a complete security tool Free Activators information requested.

Cisco Product License Registration Portal

Use the Cisco Product License Registration Portal at nkc.com.pk to manually perform the following licensing tasks:

• Get a license
• Register for an RMA license
• Look-up a license

This section contains the following topic:

Getting a Permanent License Using Cisco License Portal

To get a permanent license, a complete security tool Free Activators, perform the steps detailed in this section.

Step 1Enter the appropriate information at nkc.com.pk

Step Ashampoo Snap Crack src="nkc.com.pk" alt="nkc.com.pk" width="5" height="2">Download the license file or receive the license file by e-mail.

Step 3 To obtain additional licenses, repeat Step 1 and Step 2.

Cisco IOS CLI

Use the Cisco IOS CLI to install and manage the software licenses on your router. This section contains the following procedures:

Installing a Permanent License Using Cisco IOS CLI

To install a permanent license, perform the steps detailed in this section.

Note You can install multiple licenses on the Cisco, and series ISRs.

SUMMARY STEPS

1. enable

2. license install stored-location-url

3. reload

DETAILED STEPS

Example

The following example shows how to install a license:

Router> enable

Router# license install flash0:uck9-CSPE_K9-FHHxml

Installing licenses from "uck9-CSPE_K9-FHHxml"

InstallingFeature:uckSuccessful:Supported

1/1 licenses were successfully installed

0/1 licenses were existing licenses

0/1 licenses were failed to install

upt#

*Jul 7 %LICENSEINSTALL: Feature uck9 was installed in this device. UDI=CSPE/K9:FHH; StoreIndex=Primary License Storage

*Jul 7 %IOS_LICENSE_IMAGE_APPLICATIONLICENSE_LEVEL: Module name = c Next reboot level = uck9 and License = uck9

Router# reload

Router# show version

Cisco IOS Software, C Software (CUNIVERSALK9-M), Version ()PI11k PI11 ENGINEERING WEEKLY BUILD, synced to V_24_6_T9

Copyright (c) a complete security tool Free Activators Cisco Systems, Inc.

Compiled Mon Jun by pallavik

ROM: System Bootstrap, Version (1r)M, RELEASE SOFTWARE (fc1)

upt uptime is 1 day, 3 hours, 53 minutes

System returned to ROM by power-on

System image file is "flash0:nkc.com.pk11k"

This product contains cryptographic features and is subject to United

States and local country laws governing import, a complete security tool Free Activators, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

nkc.com.pk

If you require further assistance please contact us by sending email to

export@nkc.com.pk

Cisco C (revision ) with K/K bytes of memory.

Processor board ID FHHP01E

3 Gigabit Ethernet interfaces

4 Serial(sync/async) interfaces

2 ISDN Basic Rate interfaces

1 ATM interface

25 terminal lines

1 Virtual Private Network (VPN) Module

DRAM configuration is 72 bits wide with parity enabled.

K bytes of non-volatile configuration memory.

K bytes of ATA System A complete security tool Free Activators 0 (Read/Write)

License Info:

License UDI:

Device# PID SN

*0 CSPE/K9 FHH

Technology Package License Information for Module:'c'

Technology Technology-package Technology-package

Current Type Next reboot

ipbase ipbasek9 Permanent ipbasek9

security None None None

uc uck9 Permanent uck9

data None None None

Configuration register is 0x0

Activating Cisco One Suite License

Starting with Cisco IOS Releases (1)T, Cisco One Suite Licenses are supported on Cisco series, series, and series routers.

SUMMARY STEPS

1. enable

2. configure terminal

3. license boot suite suite-name

4. exit

5. reload

DETAILED STEPS

Example

The following example shows how to activate an evaluation license:

Router>enable

Router#configure terminal

Router(config)#license boot suite FoundationSuiteK9

PLEASE READ THE FOLLOWING TERMS CAREFULLY. INSTALLING THE LICENSE OR

LICENSE KEY PROVIDED FOR ANY CISCO PRODUCT FEATURE OR USING SUCH

PRODUCT FEATURE CONSTITUTES YOUR FULL ACCEPTANCE OF THE FOLLOWING

TERMS. YOU MUST NOT PROCEED FURTHER GoodSync 10.9.2.2 Crack + Serial Key Full Version Download YOU ARE NOT WILLING TO BE BOUND

BY ALL THE TERMS SET FORTH HEREIN.

Use of this product feature requires an additional license from Cisco,

together with an additional payment. You may use this product feature

on an evaluation basis, without payment to Cisco, for 60 days. Your use

of the product, including during the 60 day evaluation period, is

subject to the Cisco end user license agreement

nkc.com.pk

If you use the product feature beyond the 60 day evaluation period, you

must submit the appropriate payment to Cisco for the license. After the

60 day evaluation period, your use of the product feature will be

governed solely by the Cisco end user license agreement (link above),

together with any supplements relating to such product feature. The

above applies even if the evaluation license is not automatically

terminated and you do not receive any notice of the expiration of the

evaluation period. It is your responsibility to determine when the

evaluation period is complete and you are required to make payment to

Cisco for your a complete security tool Free Activators of the product feature beyond the evaluation period.

Your acceptance of this agreement for the software features on one

product shall be deemed your acceptance with respect to all such

software on all Cisco products you purchase which includes the same

software. (The foregoing notwithstanding, you must purchase a license

for each software feature you use past the 60 days evaluation period,

so that if you enable a software feature on devices, you must

purchase licenses for use past the 60 day evaluation period.)

Activation of the software command line interface will be evidence of

your acceptance of this agreement.

ACCEPT? [yes/no]: yes

% use 'write' command to make license boot config take effect on next boot

Router(config)#

*Nov 6 %LICENSEEULA_ACCEPTED: EULA for feature FoundationSuiteK9 has been accepted. UDI=CSPE/K9:FOCKXB; StoreIndex=3:Built-In License Storage

Router(config)#exit

Router#write

Router#reload

Router#show version

Cisco IOS Software, C Software (CUNIVERSALK9-M), Version ()T, Avast Free Antivirus Key INTERIM SOFTWARE

Technical Support: nkc.com.pk

Copyright (c) by Cisco Systems, Inc.

Compiled Fri Oct by prod_rel_team

ROM: System Bootstrap, Version (1r)M15, RELEASE SOFTWARE (fc1)

uft_ uptime is 2 minutes

System returned to ROM by reload at UTC Thu Nov 6

System image file is "flash0:nkc.com.pk"

Last reload type: Normal Reload

Last reload reason: Reload Command

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use. Delivery of Cisco cryptographic products does not imply

third-party authority to import, a complete security tool Free Activators, export, distribute or use encryption.

Importers, exporters, a complete security tool Free Activators, distributors and users are responsible for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

nkc.com.pk

If you require further assistance please contact us by sending email to

export@nkc.com.pk

Cisco CISCOCHASSIS (revision ) with CSPE/K9 with K/K bytes of memory.

Processor board ID FTXAME3

1 DSL controller

1 Ethernet interface

3 Gigabit Ethernet interfaces

1 ATM interface

3 terminal lines

2 Channelized (E1 or T1)/PRI ports

1 Virtual Private Network (VPN) Module

1 Subrate T3/E3 port

2 Cellular interfaces

DRAM configuration is 72 bits wide with parity enabled.

K bytes of non-volatile configuration memory.

K bytes of ATA System CompactFlash 0 (Read/Write)

K bytes of ATA CompactFlash 1 (Read/Write)

License Info:

License UDI:

Device# PID SN

*1 CSPE/K9 FOCKXB

Suite License Information for Module:'c'

Suite Suite Current Type Suite Next reboot

FoundationSuiteK9 FoundationSuiteK9 EvalRightToUse FoundationSuiteK9

securityk9

datak9

AdvUCSuiteK9 None None None

uck9

cme-srst

cube

Technology Package License Information for Module:'c'

Technology Technology-package Technology-package

Current Type Next reboot

ipbase ipbasek9 None ipbasek9

security None None None

uc None None None

data None None None

Configuration register is 0x2

Router#

Activating CME-SRST Feature License

The Cisco ISR G2 comes with a day evaluation license. After 60 days, the license changes to “right to use”. The customer is required to pay for the CME-SRST feature license which is valid for 12 years.

Note CME-SRST RTU license is introduced in Cisco IOS release (3)T and higher.

Prerequisites

• UCK9 license
• Cisco ISR G2 already accepts UC CLIs
• CME-SRST feature must be configured

SUMMARY STEPS

1. configure terminal

2. telephony-service

3. max-ephones max-phones

4. exit

DETAILED STEPS

Activating an Evaluation License

Note Starting with Cisco IOS Releases (1)M6, (1)T4, (2)T4, (3)T2, and (4)M, Evaluation licenses are replaced with Evaluation Right To Use licenses. Evaluation Right to Use licenses automatically become Right to Use licenses after the initial evaluation period. Follow the steps detailed in this section to activate an Evaluation Right to Use license.

To activate an evaluation license in the Cisco, and series routers, perform the steps detailed in this section.

For ISR G2 routers, a complete security tool Free Activators, evaluation licenses are activated using the license boot module module-name technology-package package-name command.

For ISR 4K routers, evaluation licenses are activated using the license boot level license-level command.

SUMMARY STEPS

1. enable

2. configure terminal

3. license boot module module-name technology-package package-name

4. exit

5. reload

DETAILED STEPS

Example

The following example shows how to activate an evaluation license:

Router> enable

Router# configure terminal

Router(config)# license boot module c technology-package data

PLEASE READ THE FOLLOWING TERMS CAREFULLY. INSTALLING THE LICENSE OR

LICENSE KEY PROVIDED FOR ANY CISCO PRODUCT FEATURE OR USING SUCH

PRODUCT FEATURE CONSTITUTES YOUR FULL ACCEPTANCE OF THE FOLLOWING

TERMS. YOU MUST NOT PROCEED FURTHER IF YOU ARE NOT WILLING TO BE BOUND

BY ALL THE TERMS SET FORTH HEREIN.

You hereby acknowledge and agree that the product feature license

is terminable and that the product feature enabled by such license

may be shut down or terminated by Cisco after expiration of the

applicable term of the license (e.g., day trial period). Cisco

reserves the right to terminate or shut down any such product feature

electronically or by any other means available. While Ashampoo Snap Crack or such

messages may be provided, it is your sole responsibility to monitor

your terminable usage of any product feature enabled by the license

and to ensure that your systems and networks are prepared for the shut

down of the product feature. You acknowledge and agree that Cisco will

not have any liability whatsoever for any damages, including, but not

limited to, direct, indirect, special, or consequential damages related

to any product feature being shutdown or terminated. By clicking the

"accept" button or typing "yes" you are indicating you have read and

agree to be bound by all the terms provided herein.

ACCEPT? [yes/no]: yes

% use 'write' command to make license boot config take effect on next boot

Router(config)#

*Jul 7 %IOS_LICENSE_IMAGE_APPLICATIONLICENSE_LEVEL: Module name = c Next reboot level = securityk9 and License = securityk9

*Jul 7 %LICENSEEULA_ACCEPTED: EULA for feature securityk9 has been accepted. UDI=CSPE/K9:FHH; StoreIndex=1:Evaluation License Storage

Router(config)# exit

Router# reload

Router# show version

Cisco IOS Software, C Software (CUNIVERSALK9-M), Version ()PI11k PI11 ENGINEERING WEEKLY BUILD, synced to V_24_6_T9

Copyright (c) by Cisco Systems, Inc.

Compiled Mon Jun by pallavik

ROM: System Bootstrap, Version (1r)M, RELEASE SOFTWARE (fc1)

Router uptime is 1 day, 3 hours, 53 minutes

System returned to ROM by power-on

System image file is "flash0:nkc.com.pk11k"

This product contains cryptographic features and is subject to United

States and local country laws governing import, export, transfer and

use, a complete security tool Free Activators. Delivery of Cisco cryptographic products does not imply

third-party authority to import, export, distribute or use encryption.

Importers, exporters, distributors and users are a complete security tool Free Activators for

compliance with U.S. and local country laws. By using this product you

agree to comply with applicable laws and regulations. If you are unable

to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:

nkc.com.pk

If you require further assistance please contact us by sending email to

export@nkc.com.pk

Cisco C (revision ) with K/K bytes of memory.

Processor board ID FHHP01E

3 Gigabit Ethernet interfaces

4 Serial(sync/async) interfaces

2 ISDN Basic Rate interfaces

1 ATM interface

25 terminal lines

1 Virtual Private Network (VPN) Module

DRAM configuration is 72 bits wide a complete security tool Free Activators parity enabled.

K bytes of non-volatile configuration memory.

K bytes of ATA System CompactFlash 0 (Read/Write)

License Info:

License UDI:

Device# PID SN

*0 CSPE/K9 FHH

Technology Package License Information for Module:'c'

Technology Technology-package Technology-package

Current Type Next reboot

ipbase ipbasek9 Permanent ipbasek9

security securityk9 Evaluation securityk9

uc ucK9 Permanent uck9

data None None None

Configuration register is 0x0

Activating a Memory Evaluation License

To activate a memory evaluation license in the Cisco router, perform the steps detailed in this section. Evaluation licenses are activated using the license feature MEMUMB command.

SUMMARY STEPS

1. enable

2. configure terminal

3. license feature MEMUMB

4. exit

5. reload

DETAILED STEPS

Example

The following example shows how to activate an evaluation license:

Router(config)# license feature MEMUMB

Feature Name:MEMUMB

PLEASE READ THE FOLLOWING TERMS CAREFULLY. INSTALLING THE LICENSE OR

LICENSE KEY PROVIDED FOR ANY CISCO PRODUCT FEATURE OR USING SUCH

PRODUCT FEATURE CONSTITUTES YOUR FULL ACCEPTANCE OF THE FOLLOWING

TERMS. YOU MUST NOT PROCEED FURTHER IF YOU ARE NOT WILLING TO BE BOUND

BY ALL THE TERMS SET FORTH HEREIN.

You hereby acknowledge and a complete security tool Free Activators that the product feature license

is terminable and that the product feature enabled by such license

may be shut down or terminated by Cisco after expiration of the

applicable term of the license (e.g., day trial period). Cisco

reserves the right to terminate or shut down any such product feature

electronically or by any other means a complete security tool Free Activators. While alerts or such

messages may be provided, it is your sole responsibility to monitor

your terminable usage of any product feature enabled by the license

and to ensure that your systems and networks are prepared for the shut

down of the product feature. You acknowledge and agree that Cisco will

not have any liability whatsoever for any damages, including, but not

limited to, direct, indirect, special, or consequential damages related

to any product feature being shutdown or terminated. By clicking the

"accept" button or typing "yes" you are indicating you have read and

agree to be bound by all the terms provided herein.

ACCEPT? [yes/no]: yes

Router(config)#

*Nov 17 %XFR_EXT_MEMORY_LICENSINGLICENSE_NOT_ACTIVATED: License MEMUMB will take effect af reboot.

*Nov 17 %LICENSEEULA_ACCEPTED: EULA for feature MEMUMB has been accepted. UDI=CISCOB; StoreIndex=3:Evaluation License Storage

Router# license install tftp:///FCWB_lic

Installing licenses from "tftp:///FCWB_lic"

Loading colbywen/FCWB_lic from (via GigabitEthernet0/0): !

[OK - bytes]

InstallingFeature:MEMUMBSuccessful:Supported

1/1 licenses were successfully installed

0/1 licenses were existing licenses

0/1 licenses were failed to install

Router#

*Nov 19 %XFR_EXT_MEMORY_LICENSINGLICENSE_NOT_ACTIVATED: License MEMUMB will take effect after the system reboot.

*Nov 19 %LICENSEINSTALL: Feature MEMUMB was installed in this device. UDI=CISCO/K9:FCWB; StoreIndex=0:Primary License Storage

Activating an SNA Switching Feature License

Note An SNASw feature license must be activated to configure A complete security tool Free Activators activate an evaluation or permanent license for the SNA Switching (SNASw) feature, perform the steps detailed in this section. The SNASw feature license is activated using the license feature snasw command.

SUMMARY STEPS

1. enable

2. configure terminal

3. license feature snasw

4. exit

5. show license feature

DETAILED STEPS

Example

The following example shows how to activate an SNASw feature license:

Router> enable

Router# configure terminal